TYRE pyrolysis plant (to replace the oil FURANCE).
(10 TON factory price, $ 6.5 million)
Pyrolysis is the process of thermal treatment of waste in the absence of oxygen at high temperatures and pressures. Process is carried out at temperatures usually above 400 degrees Celsius. Pyrolysis products (organic waste) is a gas, small amounts of liquid, which contains carbon of solid waste and ash. Can then be of the gases produced in the process can be used to provide energy for heating to continue this process. And final products of the pyrolysis process the material commercial value such as fuel oil and crude oil, carbon black and steel wire. This can then pyrolysis oil can be used as an alternative fuel or diesel fuel alternative. So this is why in at least 2 groups are good at the cost of wisdom, and a single system, we first run a single set, and 1.5hours later when the temperature. Up to 120celsius, is the production of gas, so we use this fuel is enough for (combustible gas) to power in a separate room and pyrolysis can not be used to intensify the gas resulting from the process to heat up another set of reactor decay heat, with no pollutant emissions exhaust. Yield as follows (taking the waste rubber and tires worn as example):
35-40% hydrocarbons (fuel oil)
Combustible gases 10%
30-33% carbon black
10-15% steel wire
Is converted to hydrocarbons in the recovered fuel oil, which is a substitute for diesel oil or furnace oil light.
Is the use of combustible gas again to heat up there by reducing energy costs.
And carbon black can be used to manufacture more value-added products that have the highest value in the market and demand.
Steel extracted brings good value in the market.
Has been testing these products generated by the scientific laboratory with several excellent results and good for customers through feedback.
Process developed is 100% of the emissions system is free, and thus make the world a cleaner and greener.
Waste tires, plastic scrap, waste, tires and
The structure of the form
Volume of reactor
D2200mm * L6000mm (6Tones), D2600mm * L6000mm (8 tons), D2600mm * L6600mm (10 tons).
6 tones (4 million), and 8 tones (6.5 million), and 10 tones (8 million)
Coal, wood, gas fuel, and fuel oil
Average oil put down
35% to 40%
Thickness of the reactor
14mm, 16mm, 18mm for
Materials from reactor
Rotation speed of the reactor
Turn 0.8 / minute
Delivery on time
60 days after the deposit of the
75% advance and 20% at delivery, 5% after the operation of the station.
The energy requirements: 50kva electricity load and energy-related equipment.
(7.5 h / p engine * 3 and 5 h / p * 2, 2.5 h / p * 2).
Any information., Pls do not hesitate to contact me,
Waiting for your response speed
Thanks and best regards
Mohsin Raza Nangiana